Please note that the old HSe tapes (eg. HSe-211) which had a shrink ratio of 2:1, have been replaced by these new HSe tapes (eg. HSe-211E) which have a more useful 3:1 shrink ratio. Please see the table below when choosing the correct size from the new HSe tapes. Heat Shrink tubing is now also available in white or yellow.
Brother P-touch Pro Tapes are built with tough and durable professional grade materials and adhesives. Developed to meet the needs of tradespeople and other professionals looking for reliable long-term identification that withstands the test of time.
This 5.2mm black on white HSe-611E Heat Shrink Tubing cassette has been designed specifically for the marking and identifying of cables, fibre and wires with an outside diameter of 0.8mm to 3.1mm.
Brother Heat Shrink sizes - Recommended for cable size:
HSe211e / HSe611e (5.2mm) - Outside Diameter Ø0.8mm to 3.1mm
HSe221e / HSe621e (9mm) - Outside Diameter Ø1.6mm to 5.4mm
HSe231e / HSe631e (11.2mm) - Outside Diameter Ø2.1mm to 7.0mm
HSe251e / HSe651e (21mm) - Outside Diameter Ø4.2mm to 13.5mm
HSe261e / HSe661e (31mm) - Outside Diameter Ø6.3mm to 20mm
This non-adhesive tape is made of a special material that is wound in the tape cassette as a flat tube. Once printed with the relevant identification details, the tube is opened up and passed over a cable or terminating connector and heated with a heat gun, the tube shrinks down, gripping the cable tightly. No adhesive is needed, ensuring that even in warm environments the heat shrink tube will not unpeel from the cable.
